Specially designed for ICE CREAM, PIZZA, PANINIS, FROZEN CASES.

Design for long products.

Specially designed for beverage distributors.

Specially designed for its installation on ships or at maritime ports. Frozen fish blocks are sprayed with special additives and disinfectants with the machines described above. The frozen block is fully sealed with a central and side plastic welds so that it can be stored in the ship’s or port’s freezing chambers.

The product is received frontally on the conveyor entrance. Cylindrical containers are arranged on lanes according to their direction of travel. A Splitter system will be used to classify the product on different lanes when working with square or rectangle-shaped containers. A pneumatic brake system is used to separate the products in the requested formats. The product is wrapped with film inside the shrink wrapping tunnel.

The product is received at a 90º angle on the conveyor entrance. The number of lanes on the machine will depend on the line product and format requirements. A pneumatic brake system is used to separate the products. The bottles are wrapped with film inside the shrink wrapping tunnel.

The product is received frontally on the conveyor entrance. Cylindrical containers are arranged on lanes according to their direction of travel. A Splitter system will be used to classify the product on different lanes when working with square or rectangle-shaped containers. A pneumatic brake system is used to separate the products in the requested formats. The suction pad, chain with retraction and lifting element assembly positions the cardboard sheets on the top of the machine, so the bar assembly places the product on the cardboard sheet. The product on the cardboard sheet wrapped with film is shrink wrapped in the shrink wrapping tunnel.

The product is received at a 90º angle on the conveyor entrance. The number of lanes on the machine will depend on the line product and format requirements. A pneumatic brake system is used to separate the products. The suction pad and chain assembly positions the cardboard sheets, so that the pushing cylinder displaces the bundle and cardboard sheet to the welding zone. The product on the cardboard sheet wrapped with film is shrink wrapped in the shrink wrapping tunnel.

Suitcases are placed on the machine’s band entrance. The length of the welding bar allows enough width of film to be cut, so that the product can be fully wrapped and plastic remains fall on the sides. When the central weld is made, the product moves onto the output band, where the side welds are applied to fully seal the package. This prevents dust or any other element from coming into contact with the product.

The product is received on the machine’s tray entrance. It automatically shrink wraps individual units of different products with very large dimensions. This model does not bundle products.

The product is received on the machine’s tray entrance. It automatically shrink wraps individual units of different products with large dimensions. This model does not bundle products.

The cookie boxes, ice cream boxes, pillow sacks, paperboard packs with canned fish cans or any other stackable product are received at the conveyor entrance. The braking, decompression, pushing, stacking and positioning cylinder assembly bundles and stacks the product, positioning it at the entrance of the Shrink wrapper-tunnel. The machine features a cylinder system that separates the product in the requested formats. The machine can use a sequential program, where the final package will have the requested number of rows, according to the type of bundles.

The square-shaped packages are received on the conveyor product entrance at a 90º angle. Packages move horizontally on their longest side; the conveyor features a rising slope with a pneumatic system on the end that positions packages vertically. The machine features a cylinder assembly that separates the product in the requested formats. A 1 to 2 row positioning system can be installed on the conveyor entrance to increase the production rate.

The product is placed on the machine’s input tray at 90º. The machine has a braking, decompression and pushing cylinder assembly that separates the product in the requested formats.
The product must be moved from 1 to 2 rows to achieve the required production rate. Tetra briks do not tolerate high pressure, so a Splitter system is installed to arrange the products on two rows.
Dairy products are highly corrosive. We recommend producing them in a stainless steel machine in these environments.

The product is placed on the machine’s input tray at 90º. The machine has a braking, decompression and pushing cylinder assembly that separates the product in the requested formats. It has been specially designed to process bags with a top flap, it features various pneumatic systems that fold the flaps according to the customer’s specifications: all in the same direction, longitudinally or transversally, three leftwards and the last rightwards.

The product is placed on the machine’s input tray at 90º. The machine has a braking, decompression and pushing cylinder assembly that separates the product in the requested formats. A sequential program will be used, according to the bundling operation of the machine, pushing the first row and then pushing all other rows required to complete the bundle.

The product is placed at 90º on the conveyor at the machine entrance. The presence of the package is detected at the end of the conveyor, Activate the decompression cylinder so that the pneumatic pushing system moves the product to the welding zone. It automatically shrink wraps individual units of different products and/or cardboard trays with pre-bundled products. This model does not bundle products.

The product is received on the machine’s tray entrance. It automatically shrink wraps individual units of different products and/or cardboard trays with pre-bundled products. This model does not bundle products.

The product is placed between the guides of the pushing cylinder. The two start push-buttons are pressed; the packaging and shrink wrapping process is fully automatic.