Specially designed for beverage distributors.

Complete and high production line used to bundle your products:
Cardboard trays + shrink wrap film.
Cardboard sheet + shrink wrap film.
Only film, packs of 2 or 3 units, double insertion.
Optional silk-screen printed film shrink wrapping, easy open system and/or multi-pack.

Bundles and shrink wraps bottles, cans, jars, containers, etc.
– High production rate machine for natural springs or water bottling plants.
– Special for promotions of 3 or 2 units.
– Optional silk-screen printed film shrink wrapping, easy open system and/or multipack.

The product is received frontally on the conveyor entrance. Cylindrical containers are arranged on lanes according to their direction of travel. A Splitter system will be used to classify the product on different lanes when working with square or rectangle-shaped containers. A pneumatic brake system is used to separate the products in the requested formats. The product is wrapped with film inside the shrink wrapping tunnel.

Wrap Around Packer + Front shrink wrapper-tunnel, to bundle products in closed boxes or on cardboard trays + shrink wrap film.

Machine used to bundle and place square-shaped packages on display stand trays: height of the tray edge equal to the height of the product. The product feeding system can be modified to handle bottles, jars, stacked cans, paperboard packs (cluster), etc.

Machine used to bundle and place square-shaped packages on standard trays + film or on half pallet trays, with no shrink wrap, dim. 800x600mm.

Forms 1200x800mm and/or 800x600mm trays with flat cardboard sheets, applying hot glue to the four corners of the sheet. Specially designed to work on lines with a Robot that pre-bundles the format and positions it on the formed tray.

Machine used to bundle and place bottles or jugs on half pallet trays (800x600mm) or full pallet trays (1200x800mm). Optional bundling of cylindrical bottles in a STAGGERED arrangement on trays.

Specific machine for bottling companies, springs, beer breweries, soft drink manufacturers, etc. Bundles bottles in the requested formats with a braking system, according to the production requirements.
Optional printed film shrink wrapping, easy open system and/or multipack. A Splitter System must be installed if the bottles or jugs are not cylindrical.

Machine used to bundle and place containers, cans and jars on trays + film or on cardboard sheets + film. Optional printed film, Easy Open, multipack.

The input system changes according to the product, production and bundling requirements. The suction pads of the supply system are placed on the base of the cardboard sheet, positioning the raised side panels between the chain folding elements. The feeding system moves the bundle to the opened box/tray, which is formed according to the type of product. The flaps are glued with hot glue using a Hot Melt unit. The lower (for boxes/trays) and upper trainer (only for boxes) folds al flaps of the box/tray.

Full high production rate line used to bundle products in Wrap Around boxes or on cardboard trays + shrink wrap film.

The product is received at a 90º angle on the conveyor entrance. The number of lanes on the machine will depend on the line product and format requirements. A pneumatic brake system is used to separate the products. The bottles are wrapped with film inside the shrink wrapping tunnel.

The product is received frontally on the conveyor entrance. Cylindrical containers are arranged on lanes according to their direction of travel. A Splitter system will be used to classify the product on different lanes when working with square or rectangle-shaped containers. A pneumatic brake system is used to separate the products in the requested formats. The suction pad, chain with retraction and lifting element assembly positions the cardboard sheets on the top of the machine, so the bar assembly places the product on the cardboard sheet. The product on the cardboard sheet wrapped with film is shrink wrapped in the shrink wrapping tunnel.

The product is received at a 90º angle on the conveyor entrance. The number of lanes on the machine will depend on the line product and format requirements. A pneumatic brake system is used to separate the products. The suction pad and chain assembly positions the cardboard sheets, so that the pushing cylinder displaces the bundle and cardboard sheet to the welding zone. The product on the cardboard sheet wrapped with film is shrink wrapped in the shrink wrapping tunnel.

The product is placed on the machine’s input tray at 90º. The machine has a braking, decompression and pushing cylinder assembly that separates the product in the requested formats.
The product must be moved from 1 to 2 rows to achieve the required production rate. Tetra briks do not tolerate high pressure, so a Splitter system is installed to arrange the products on two rows.
Dairy products are highly corrosive. We recommend producing them in a stainless steel machine in these environments.

The product is placed at 90º on the conveyor at the machine entrance. The presence of the package is detected at the end of the conveyor, Activate the decompression cylinder so that the pneumatic pushing system moves the product to the welding zone. It automatically shrink wraps individual units of different products and/or cardboard trays with pre-bundled products. This model does not bundle products.

The product is placed between the guides of the pushing cylinder. The two start push-buttons are pressed; the packaging and shrink wrapping process is fully automatic.